China 3.97 inch tft touch screen 480*800 Manufacturers, Suppliers, Factory

First, it should be clear that the main type of radiation produced by LCD monitors is low-frequency electromagnetic radiation, and its radiation level is far below international safety standards. Compared with the old cathode ray tube (CRT) monitors, LCDs have much less radiation. Therefore, the impact of LCD devices on the human body is very limited. However, there are ways to reduce the impact of this radiation. In this article, we will explore some effective ways to reduce LCD screen radiation.

2.4-inch 240*320 interface SPI/RGB/MCU 2.4-inch 240*320 interface MIPI 2.4-inch 240*320 interface SPI 2.4-inch 320*480 interface MIPI/RGB 2.4-inch 480*640 interface MIPI/RGB 2.4-inch 272*480 interface RGB/MIPI 2.4-inch 272*480 interface SPI/MCU/RGB 2.4-inch 240*320 semi-transparent and semi-reflective 2.4-inch 240*320 high brightness 1000nits The above products are all IPS, using ILI9341 and ST7789 driver ICs, can be high-brightness, support customization, welcome to email consultation.

Compared with parallel ports, MIPI interface modules have the advantages of fast speed, large amount of data transmission, low power consumption, and good anti-interference. They are increasingly favored by customers and are growing rapidly.

One such player is the 3.5-inch high-definition screen HIFI player that boasts a 640*960 high-resolution screen. supports RGB and MIPI interfaces, 8 high-brightness lights, low power consumption, and the peripheral structure is the same as the 3.5-inch low-resolution 320*480, so it can be a perfect replacement.This device is the perfect choice for anyone who wants to experience their music in stunning detail. With its high-quality sound and crystal-clear visuals, it's the ideal device for listening to your favorite music on the go.

As the name suggests, the liquid crystal display (LCD) panel uses a liquid crystal to turn pixels on and off to display specific colors.

LCD screen itself has problems. If it is indeed the screen itself that is at fault after testing with relevant instruments, in addition to replacing a new LCD screen, the device-related software should be debugged and optimized so that the screen can work with the motherboard's CPU. The best way is to increase the OSC frequency of the IC and see how the LCD screen flickers. Of course, if the TFT LCD screen has separate row and column drivers, you can also adjust it by setting the driver chip.