China 3.5 inch tft with touch display GT911 320*480 MCU Manufacturers, Suppliers, Factory

How MCU Drives LCD Screen and Design Considerations

Ordinary LCD screens use CCFL light sources, that is, cold-cathode fluorescent lamps (similar to the scanning lamps in the copy), with one on each side of the screen and a backlight on the back of the display, which is composed of fluorescent substances. The light sources on both sides can be evenly distributed on the back of the entire screen, so that the entire screen can be evenly illuminated. However, due to technical limitations, the brightness of such a display is not completely uniform, but it is difficult to find it. At the same time, the lamp also has a certain lifespan, and it will turn yellow after a long time.

​An LCD display module is an electronic component used for displaying characters, symbols, and graphics in a clear, easy-to-read format. It typically consists of a liquid crystal display (LCD) panel, a driver circuit board, and other supporting components, such as backlighting and a controller chip.

Backlighting is used in small, light, flat-panel liquid crystal displays (LCDs) and other electronic devices that require backlighting, including handheld devices as small as the palm of your hand, and large-screen TVs. The goals of backlight design include low power consumption, ultra-thin, high brightness, uniform brightness, large area, and control of different width and narrow viewing angles. To achieve these challenging design goals with controlled cost and rapid implementation, computer-aided optical design tools must be used for design. This article introduces the characteristics of LightTools optical design and analysis software from ORA Company in the United States, which can be used to develop the most advanced backlight design applications today.

First, it should be clear that the main type of radiation produced by LCD monitors is low-frequency electromagnetic radiation, and its radiation level is far below international safety standards. Compared with the old cathode ray tube (CRT) monitors, LCDs have much less radiation. Therefore, the impact of LCD devices on the human body is very limited. However, there are ways to reduce the impact of this radiation. In this article, we will explore some effective ways to reduce LCD screen radiation.

The 3.2inch IPS display is widely used in various electronic devices because of its high resolution, high brightness, and versatility. In this article, we will explore the different applications of the 3.2inch 320*480 resolution high brightness IPS display in the electronics industry.